You'll need a 1/2in router (deWalt, Makita, Festool, Bosch), 30mm guide bush with centring mandrel, replaceable-tip TCT straight cutter and a decent sized jig in either aluminium (Titman) or solid laminate. The RT cutters are turned every second or third cut (so you get 2 to 3 joints out of a set of cutters - but the edge is superb). Always do your cut so that you're cutting into the laminate to avoid break-out - this translates to a left hand end cut being done with the jig on the underside, for example. Make a roughing cut then do a single final pass (the jig's manual will explain what I mean) and seal your joints with Colourfill. Best joiners I've come across are made by Projoin in Dover. They screw on flat and have a cam tightening mechanism. You'll also need a laminate trimmer and a fine metal file to deal with end strips, as well as a heat gun if you need to form the end trims at all.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local