Anyone 'young' enough to identify this shower mixer cartridge and figure out removal?

Joined
14 Oct 2013
Messages
33
Reaction score
1
Location
London
Country
United Kingdom
Hi all,
Recently moved into a circa 40 year old house (mid to late 80s) and a couple of weeks in, the handle to our shower broke off mid-shower.
The only way to switch it off was to isolate it from the cold/hot pump feeds.
This could be the original or in the last 20 odd years old

After cutting through tons of silicon, this is what we are left with - 99% its the cartridge as the on/off motion (lift/push) is completely floppy and the temp (left/right) while resistant, does nothing.

Problem is no one can identify it and more importantly, figure out removal of it to see if a replacement exists.
The only one clue is, it does state Ideal Standard in the middle.

Anyone remember this type of mixer and remember how to remove?

Thanks in advance!

1795039384567.png
1795039426534.png
 
removal is quite easy you are going to have to chop out a bigger hole to get to the connections on either side
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top