Hi All,
I've spent a good few hours looking through the topics and replies due to the problems i am having with the subject problem.
The boiler is approx 6 years old
Basically, the boiler keeps cutting out when any hot tap is running. This is getting progreesively worse. I use to be able to turn the boiler on and off and then i could run a bath, fill a sink etc.
After advice given to people with similar problems, i removed the secondary heat exchanger, this was very clean, but i still gave it a good blast with the jet washer.
I put back together and it worked fine. I ran a bath, still ok. Came to run a sink full for the pots a few hours later, and the problem reoccured. I then turned the heating on and tried to run the tap again, this time it was hot.
Can anybody please give me some much appreciated advice as to where i could next look at solving this problem.
Don't know if this is anything to do with it, but sometimes especially in winter the 2 red LED's are lit in hte morning when i go to investiagte why the heating hasn't come on at the pre programmed time.
Kind Regards
Anthony
I've spent a good few hours looking through the topics and replies due to the problems i am having with the subject problem.
The boiler is approx 6 years old
Basically, the boiler keeps cutting out when any hot tap is running. This is getting progreesively worse. I use to be able to turn the boiler on and off and then i could run a bath, fill a sink etc.
After advice given to people with similar problems, i removed the secondary heat exchanger, this was very clean, but i still gave it a good blast with the jet washer.
I put back together and it worked fine. I ran a bath, still ok. Came to run a sink full for the pots a few hours later, and the problem reoccured. I then turned the heating on and tried to run the tap again, this time it was hot.
Can anybody please give me some much appreciated advice as to where i could next look at solving this problem.
Don't know if this is anything to do with it, but sometimes especially in winter the 2 red LED's are lit in hte morning when i go to investiagte why the heating hasn't come on at the pre programmed time.
Kind Regards
Anthony