I am wanting to replace a nearly 20 year old, but now noisy, Greenwood Airvac R90 bathroom extractor fan that is ceiling mounted directly above an over bath shower. The bathroom measures (w x l x h) 2.38m x 2.1m x 2.49m. This is, roughly, 12.45 cu. metres. The floor of the bath to the ceiling, where the fan is mounted, measures 2.31metres.
As the ceiling height is above that of the 2.25m stipulated for zones 0, 1 and 2 in the regulations, are there any restrictions I need to be aware of when replacing the fan?
The Greenwood Airvac RF90 looks to be almost a like for like replacement but, purely on a noise level, would the Greenwood Airvac Unity CV2GIP be another, valid (better) option?
I am open to other recommendations as well.
As the ceiling height is above that of the 2.25m stipulated for zones 0, 1 and 2 in the regulations, are there any restrictions I need to be aware of when replacing the fan?
The Greenwood Airvac RF90 looks to be almost a like for like replacement but, purely on a noise level, would the Greenwood Airvac Unity CV2GIP be another, valid (better) option?
I am open to other recommendations as well.
