Baxi 30 He - Fan Fault

[NewToGas]

hi there

Am new to this so please bear with me !

I have a baxi which is showing up with a flashing 50 which in the fault finding says fan fault.

on HW and heating the boiler fan kicks in and the speed seems fine , i can hear the pressure switch working but there is no ignition.

i have tested the pressure switch with a multimeter - thats ok

It seems an imtermitten fault as every so often the ignition kick in and it lights.

I looked at changing the fan but it looks fine so am thinking of just changing the aps to see if that cures it

any suggestions or comments appreciated

 

[powell30]

Sorry but the aps etc is not a diy area to be messed with. No advice on gas safe items will be discussed in the public forum. Call out a gas registered engineer