baxi 80e lack of hw and leak from the gub screw on diverter

[combispecialist]

to cut a long story short ure diverter is knackered hence luke warm hw,its passing to rads instead of fully heating the plate h-exchanger,do u know gc number of appliance,it should be on the fold down lid somewhere and i maybe able 2 help u some more,when u changed the hw diaphragm how many screws did the brass plate have in it that u undone??

 

[KANTGO]

47-075-05 and there is six screws on the front of the diveter valve

 

[clf-gas]

Its the same boiler with different number.

Check it out here.

www.partsarena.com


My work here is done

 

[combispecialist]

u need a new diverter valve.part number-
complete diverter inc hw flow valve-248061

if the hw flow valve is ok then u just need the diverter body

part number-248062

p.s the hw flow valve is the brass unit that the pin pushes out from

 

[combispecialist]

ure looking at £100 for the full valve and 80 for just diverter,for the sake of 20 quid just order complete unit and be done with it the end

 

[KANTGO]

thank you for all you help so is that is all i need