baxi bahama 100 diverter head

[davidb100]

Hi, After all the usual problems - flow switches - pcb, etc, this morning the diverter head (whilst running hot water) started rapid clicking - I 'unplugged' diverter head and central heating runs ok - Is this is just a case of replacing diverter head? Thanks David

 

[Vic Spanner]

Hi, After all the usual problems - flow switches - pcb, etc, this morning the diverter head (whilst running hot water) started rapid clicking - I 'unplugged' diverter head and central heating runs ok - Is this is just a case of replacing diverter head? Thanks David

No you will need to check that the diverter cartridge is moving freely all the way in and all the way out. Push it in with a blunt flat tool and see if it returns all the way out.Pull with grips to confirm. If strong resistance is felt..Replace

 

[davidb100]

Hi,

Thanks for your advice, the diverter cartridge is quite hard to budge, so will replace the diverter valve tomorrow and 'not' the diverter head. much appreciated. thanks David