Hi
have a problem with a baxi bahama 100
DHW mode
Fan runs
Pumps runs
*No sparking at the electrodes
*Pump and fan do not stop running when tap switched off
CH mode
Fan runs
Pumps runs
*No sparking at the electrodes
*Pump and fan do not stop running when switched off. Switching tap on and off stops fan and pump in CH mode ONLY
Suspect PCB so checked 10 & 12 on ignition cartridge which is 230V.
50V on X4 pins 3 & 4
Pressure switch is ok
No flame fail
flame indicator not lighting
Any help appreciated
Cheers,
Scott
have a problem with a baxi bahama 100
DHW mode
Fan runs
Pumps runs
*No sparking at the electrodes
*Pump and fan do not stop running when tap switched off
CH mode
Fan runs
Pumps runs
*No sparking at the electrodes
*Pump and fan do not stop running when switched off. Switching tap on and off stops fan and pump in CH mode ONLY
Suspect PCB so checked 10 & 12 on ignition cartridge which is 230V.
50V on X4 pins 3 & 4
Pressure switch is ok
No flame fail
flame indicator not lighting
Any help appreciated
Cheers,
Scott