Hi all, great forum. Been browsing as a guest for some time as I have a few projects on the go.
I have the above combi boiler and when the hot tap is on the water comes through piping hot and contiumes to come through hot with a continuous flame until turned off, all fine. When the heating is turned on, the flame fires up for 5-15 seconds then goes out. Does this continuously with a gap of about 30 seconds between the flame firing up until I switch the boiler off comlpetely.
The ignition is working fine but we cant get to the bottom of why the flame going out. It delivers (some) hot water to the rads but only after a while presumably heating the water just enough to get to the rad.
HELP!
Don't want to spend, nor can we afford to spend £1200 on a new boiler.
Any responses would be welcome.
I have the above combi boiler and when the hot tap is on the water comes through piping hot and contiumes to come through hot with a continuous flame until turned off, all fine. When the heating is turned on, the flame fires up for 5-15 seconds then goes out. Does this continuously with a gap of about 30 seconds between the flame firing up until I switch the boiler off comlpetely.
The ignition is working fine but we cant get to the bottom of why the flame going out. It delivers (some) hot water to the rads but only after a while presumably heating the water just enough to get to the rad.
HELP!
Don't want to spend, nor can we afford to spend £1200 on a new boiler.
Any responses would be welcome.