Baxi Solo 2 PF - how to reset?

[Number6]

Hi RCD tripped today and now the boiler won't work. I'm pretty sure there is a way to reset the boiler but I can't remember it and I've lost the manual!

Does anyone know how to do it!?

I think the boiler is ok, its usually very reliable.

Thanks

 

[imiller9]

If you turn the black control knob round to off, wait a few seconds and turn back to its original position that should reset

 

[Number6]

Cheers boiler switches on but won't fire up

 

[bazdaman]

Does the boiler on light come on?

 

[Number6]

Light on but doesn't fire up, will have to call out gas man. cheers

 

[ianmcd]

This is the only user reset but I dont think it is this but no harm in trying

NOTE: Cut-out is indicated by illumination of the neon
light on the control box.
2. Remove the lower door panel by following the
sequence of diagrams (Fig 87).
3. To reset the boiler - Turn the boiler thermostat control
knob fully anti-clockwise to the OFF position marked ‘0’
(Fig. 88). Wait ten seconds, turn the control knob
clockwise to the required thermostat setting, the red neon
goes out, the boiler will start automatically.
4. No adjustment to the gas controls or main thermosta

 

[Number6]

Cheers, boiler needs a new PCB