Bi fold shower door pops open

[Gary111]

Hi, I have a bi fold shower door, it won't shut flat, I can't see any stops on the rail or adjustment of any sort.
Any ideas please ?

 

[conny]

Need a better picture, such as a full width one showing the centre fold and other end.

 

[Gary111]

 

[Gary111]

Is that any use ?
I notice the seal in the middle looks warped, maybe I could trim the part that goes the opposite way ?

Also there are strips at the top and bottom , which I assume are magnets,
one of which looks like it's maybe 1cm out of place, can't see that making the difference though.

Thanks

 

[Gary111]

Also there are screws on the top of the upper wheel blocks that I've tightened which I think may have been a slight vertical adjustment ??
Seems like it helped a little

 

[conny]

Could be the magnets are out of position. Try to re-align them but I wouldn't try trimming the seal in case you get leaks through the gap.

 

[CBW]

Has it always done this, or just started?

 

[Gary111]

It's done it for some time, I'm not sure if from new as I bought the property with it in

 

[CBW]

Might just be poorly fitted doors then? Adjustment on those could be the screws to the frame.

 

[Gary111]

Thanks everyone for your help,
I was wondering if the magnets on the door could have been fitted the wrong polarity round?
so they oppose the opposite magnets on the frame ?

Or if I can add some sort of waterproof door closer spring ?

Or a latch of some sort ,?

Maybe one of these magnetic latches ?
https://www.screwfix.com/p/magnetic...VlOJ3Ch1l_QqIEAQYCCABEgJ4QfD_BwE&gclsrc=aw.ds

What do you think ?