biasi boiler seperate programer
- Thread starter terrys
- Start date
No response to date that Terrys ? as I see it you would leave the timeclock on the boiler set at 24 hrs & utilise a programmable room stat , you probably already have a room stat ?? BUT & this is important most if not all ?? Biasi combis have volt free conections from the control board to the room stat !! this means they send voltage out to stat ect they do not like equipment that sends or puts voltage onto the pcb , so you need volt free contacts , you should be able to down load M I' s ect from the biasi website , assume the boiler is a fairly modern one ??
the boiler is not in yet its new im not having a room sat just a programer so i can boost the dhw or the ch when i need to
So you are getting a Biasi than , hope you don't have a problem with there after sales than 
£95 deposit to attend an in-warranty fault obviusly refundable if it is a manu fault & not an install fault
Apparently they do not attend intermittent faults either ?? or so I was told ! Lousey company to deal with in my view/opinion !
Boost your hot water ?? combi ?? are you linking it to a cylinder ??
No room stat ?? lets hope yopu do not need a warranty repair than service agents down here (some) will walk away , that a be your £95 gone ?? maybe , possibly ??
£95 deposit to attend an in-warranty fault obviusly refundable if it is a manu fault & not an install fault Apparently they do not attend intermittent faults either ?? or so I was told ! Lousey company to deal with in my view/opinion !
Boost your hot water ?? combi ?? are you linking it to a cylinder ??
No room stat ?? lets hope yopu do not need a warranty repair than service agents down here (some) will walk away , that a be your £95 gone ?? maybe , possibly ??
transam";p="1762036 said:So you are getting a Biasi than , hope you don't have a problem with there after sales than
Apparently they do not attend intermittent faults either ?? or so I was told ! Lousey company to deal with in my view/opinion !
B oost your hot water ?? combi ?? are you linking it to a cylinder ??[ /quote]no i ment if i come home and the water is not hot i just ment i would like to advance the set time of the on period
How will you control the room temperature?
How will the mandatory requirement to have a boiler interlock be met?
PS why start two topics on the same question?
sorry i ment the heating not the hot water
As D Haisham said you need to have temp interlock on the boiler this will be a requirement in the benchmark log book that comes with the boiler , which all manus will be tightening up on no log book no warranty is the word out ?
trust me in the event of a warranty fault BIasi UK WILL , look for any excuse to walk away ( maybe )
would suggest a programmable room stat although volt free time clocks are available & than use a normal room stat !
What Biasi is it ?? Normal as in non programmable !!!! try a digi stat !
trust me in the event of a warranty fault BIasi UK WILL , look for any excuse to walk away ( maybe )
would suggest a programmable room stat although volt free time clocks are available & than use a normal room stat !
What Biasi is it ?? Normal as in non programmable !!!! try a digi stat !
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
