Has anyone had problems with pipes popping off Biasi recuperator when pressure builds up.
New seal and clip fitted but still not staying put!!!
New seal and clip fitted but still not staying put!!!
Biasi Recuperator!!!!!! :-(
- Thread starter Ssiany
- Start date
Sponsored Links
I assume the recuperator is one of the flue condensate recovery units.
If the house has a water meter or a non return valve stop cock. The heating of the mains cold has nowhere to go unless someone opens a hot tap. The pressure water pressure will soon build up and something will give.
Needs an expansion vessel and pressure relief valve fitting.
If the house has a water meter or a non return valve stop cock. The heating of the mains cold has nowhere to go unless someone opens a hot tap. The pressure water pressure will soon build up and something will give.
Needs an expansion vessel and pressure relief valve fitting.
The OP is talking about the recouperator!
The clips do sometimes break but its not a common problem!
The pressure is set by the user and will only vary slightly from expansion up to say 1.8 Bar if the EXV is working correctly.
The OP should not have been opening the combustion chamber. Needs a professional to work on it and diagnose the underlying problem.
Tony Glazier
The clips do sometimes break but its not a common problem!
The pressure is set by the user and will only vary slightly from expansion up to say 1.8 Bar if the EXV is working correctly.
The OP should not have been opening the combustion chamber. Needs a professional to work on it and diagnose the underlying problem.
Tony Glazier
Thanks for replies.
Plumber said the recup/ heat exchanger needs replacing!!! why would this cause the pipe to pop off under pressure!!!!!!!
Plumber said the recup/ heat exchanger needs replacing!!! why would this cause the pipe to pop off under pressure!!!!!!!
Sponsored Links
Thanks for replies.
Plumber said the recup/ heat exchanger needs replacing!!! why would this cause the pipe to pop off under pressure!!!!!!!
It doesn't need replacing. Get someone else.
Thanks for replies.
Plumber said the recup/ heat exchanger needs replacing!!! why would this cause the pipe to pop off under pressure!!!!!!!
It doesn't need replacing. Get someone else.
How come?
have you come across this prob!!
Riva Compact HE M96.24SM/C
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
