Bib taps with 45 degree pipe entry?

[chaskidd]

I have a customer who wants to replace two bib taps that have a 45° pipe spigot over a butler sink. They screw directly into 1/2 BSP 90° unions on surface mounted pipe work that is 75% buried in tiles so not easy to re-plumb without making a real mess.

Are 45° curved Bib tap extension mounts available to use normal 90° back or bottom spigots? Are bib taps with a 45° pipe spigot still available anywhere (not according to Google)? Any clues, ideas or suggestions welcomed!

 

[oldbuffer]

Have a look at BES, page 103

 

[Charnwood]

Is this what you mean by 54 degree: (Whoops, should be 45 degrees! )

Most cheap ones are of that design and most local merchants will have them.

Do you want them in brass or chrome finish?

 

[chaskidd]

Right angle - but it is an outside tap. I need indoor chrome taps.

Thanks for the nod on BES but they only have garden taps also.

 

[Charnwood]

We get the cheap brass ones chromed regularly for customers.
They don't end up shiney, just silvery-coloured.
You gets what you pays for.

 

[JimCrow]

Have a look here,

http://www.qssupplies.co.uk/Taps/Bib-Taps/Product/472.htm

 

[Charnwood]

Have a look here,

The chrome ones there are all 90 degrees, though.