i have a conventional oil heating system i have to bleed the same radiator every 2 or 3 days i have also noticed water coming out the overflow and its not coming from the cold water tank when i run the hot water tap this will stop is the water coming from the radiator i also get a few bangs in the pipes when heating or water comes on is this linked?
BLEEDING RADIATOR
- Thread starter jack34
- Start date
Sponsored Links
More info needed 
plus, some punctuation in your post would make it clearer
do you have a copper, hot water storage cylinder (in the airing cupboard)
is the cylinder "indirect"
is there a pressure gauge on the boiler or on the pipe work
It sounds like you might have a hole in the cylinder coil caused by corrosion, this is allowing water to move from the hot water cylinder into the central heating circuit. Water may be getting drawn into the central heating system causing the overflow from the (small black plastic ) expansion tank.
plus, some punctuation in your post would make it clearer
do you have a copper, hot water storage cylinder (in the airing cupboard)
is the cylinder "indirect"
is there a pressure gauge on the boiler or on the pipe work
It sounds like you might have a hole in the cylinder coil caused by corrosion, this is allowing water to move from the hot water cylinder into the central heating circuit. Water may be getting drawn into the central heating system causing the overflow from the (small black plastic
) expansion tank.DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
Similar threads
- Deleted member 15266
- Plumbing and Central Heating
