Bleeding rads!!!

[Faz2726]

Hopefuly someone can help , bleedinbg the rad as there seems to be a bit of air tin the system, bubbling noises! Iv turn heating off first then bled the rads some seem to dribble others spray out at high speed , but does not seem to be any air.

what is causing the high pressure should i bleed until it slows down ?

Any help would be great

 

[John506]

No just bleed the air out until the water comes out, its squirting out because your system is under pressure, as it should be.

 

[bengasman]

try this:
http://www.diynot.com/forums/viewtopic.php?t=6026