Connect a hose to a tap and the other end to the drain cock and keeping a VERY careful eye on the store and F&E tank, fill the system from the mains tap.
As thought boilermate would not fill. Tried to backfill through rad ( already of the wall so valve easily accessable)
Problem now is no hot water in rads.
Couple of questions :
1.Taps have very hot water so assume that boilermate is full of hot water even though it doesnt feel warm. Is this correct?
2.Return pipe very hot on both sides of pump and pump definately working on all speeds as i can hear it push water around at different speeds.
Flow pipe to bottom of boilermate-Pipe only lukewarm under pump but hot above. Cant hear if pump running on more than one speed but is definately running as i have taken the bleed valve off and spindle is rotating. No water dripping out of bleed valve though.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local