Got home the other day to find our Bosch SGS5308 Dishwasher was off. I thought I had started it before we went to work. Display was blank - usually stops displaying "0".
I checked the On-Off switch and it was indeed depressed (me too!).
Opened the door and found it had stopped before draining initial rinse.
Checked external mains electricity supply and fuses - all O.K.
Checked drain pump impeller free and hose not blocked - O.K.
Checked incoming main water pressure - O.K.
Bit lost now, except for the control module, which looks O.K.
A new controller is nearly a third of the cost of a new machine, and it is seven years old.
Is there anything else I could check before I admit defeat?
I checked the On-Off switch and it was indeed depressed (me too!).
Opened the door and found it had stopped before draining initial rinse.
Checked external mains electricity supply and fuses - all O.K.
Checked drain pump impeller free and hose not blocked - O.K.
Checked incoming main water pressure - O.K.
Bit lost now, except for the control module, which looks O.K.
A new controller is nearly a third of the cost of a new machine, and it is seven years old.
Is there anything else I could check before I admit defeat?
