Bosch Dishwasher looks very dead

Joined
11 Jun 2007
Messages
1
Reaction score
0
Location
Oxfordshire
Country
United Kingdom
Got home the other day to find our Bosch SGS5308 Dishwasher was off. I thought I had started it before we went to work. Display was blank - usually stops displaying "0".

I checked the On-Off switch and it was indeed depressed (me too!).
Opened the door and found it had stopped before draining initial rinse.
Checked external mains electricity supply and fuses - all O.K.
Checked drain pump impeller free and hose not blocked - O.K.
Checked incoming main water pressure - O.K.

Bit lost now, except for the control module, which looks O.K.
A new controller is nearly a third of the cost of a new machine, and it is seven years old.

Is there anything else I could check before I admit defeat?
 
There's a good chance it could be the door switch itself.

This is easily tested if you have a multimeter.

Make sure the machine's unplugged if you're going inside!
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top