Bosch Exxcel 1400 motor brushes

Joined
16 Oct 2010
Messages
14
Reaction score
0
Location
Sussex
Country
United Kingdom
Grateful for expert help here!

Trying to replace these - there is a multi-pin yellow connector block which stops my removing one of the brushes. It looks as if I need to remove the block, but I am reluctant to put too much force on it - how do I get the brush out?
 
Sponsored Links
Not specific to your make but usually easier to remove motor from drum.
 
This is with the motor on the bench. I can see no way to move the block. The problem I have is that only the top part of the yellow block (the part with the wires passing through) came off which I suspect is bad news. I cannot find any way to release the lower main part of the yellow block.
 
As the model is not shown, this is a suggestion that maybe the block is part of the brush assembly itself?
 
Sponsored Links
Looks like one of these then
Ebay item 221698931420.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top