Bosch Slimline Dishwasher
- Thread starter pine45
- Start date
Appliance in house just purchased and not more than 18months old. but manual is not specific to machine and I can't find a model name/number anywhere. The door mechanism is a metal U-shape on the body which slots into a rectangular space on the door. Door needs a good tug to open and I wonder if there is some way this could be made easier.
The model details are laser engraved on the middle of the door lip, it is sometimes a little difficult to see in bad light. Use a torch, you'll find it (we need the "Enr. to identify the model). Is it integrated or free standing? Does it feel like the door latch is sticking or is it difficult to open fully?
Sure the E-number isn't SRV43M03GB/41?
If it sticks only on initial opening I would try adjusting the U-lock bar a little...if that doesn't help change the door latch.
If the door is stiff & difficult to open all the way down that points to a problem with the spring/cable/hinge assembly.
If it sticks only on initial opening I would try adjusting the U-lock bar a little...if that doesn't help change the door latch.
If the door is stiff & difficult to open all the way down that points to a problem with the spring/cable/hinge assembly.
It is pulling the door initially ie getting the u-bar out of its slot on the door. Can't see anyway of adjusting but I am elderly and will get my daughter to take a look next time she is here. I feel a squirt of WD40 is what it needs but worrry that might do harm! Meantime very many thanks.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
