hi all we have a 2 year old Indesit WM12X intergrated washing machine which had been working fine until today.
When the drum turns it is making a clicking noise or shoulds like something is rubbing aganist the drum,i took the machine out opened it up at the back and the noise seems to be coming from behind where a funny looking gold screw holds the spider thing that the belt is attached to the drum with.
I thought straight away that it was the bearings but after a bit of looking on this forum i found posts from people talking about bra wire, i asked my wife to check the last couple of bra's that she washed and YES one of them had a wire missing from one side
The drum does not have any movement in it up or down and when i turn the drum by hand it makes a click sound every 1/4 turn or so but when the machine was spinning earlier the noise was awful
If it is bra wire how do i remove it ?
Any help most welcome plz
When the drum turns it is making a clicking noise or shoulds like something is rubbing aganist the drum,i took the machine out opened it up at the back and the noise seems to be coming from behind where a funny looking gold screw holds the spider thing that the belt is attached to the drum with.
I thought straight away that it was the bearings but after a bit of looking on this forum i found posts from people talking about bra wire, i asked my wife to check the last couple of bra's that she washed and YES one of them had a wire missing from one side
The drum does not have any movement in it up or down and when i turn the drum by hand it makes a click sound every 1/4 turn or so but when the machine was spinning earlier the noise was awful
If it is bra wire how do i remove it ?
Any help most welcome plz