Brick to block bond

[23vc]

Hi
keying/coursing in bricks to blocks on the same wall, which I planned to do with a half bond on the block, but I got the brick bond wrong so I need to do quarter block bond on the join, otherwise the brick perp join lines up with the block perp above.
In other words the overlap is only half a brick as opposed to half a block.
Is this a problem or am I OK to carry on?
I may not have explained this very well, but any advice appreciated
Cheers
John

 

[^woody^]

Build the brickwork half a brick longer

 

[23vc]

Thanks Woody so is what I've done so far no good? (See pic) If so I'll redo it or just increase the overlap on the next courses.