Hi please help. Just replaced a radiator. Drained off system. When i tried to restart boiler f22 dry error shows. I bled radiators downstairs ok but upstairs radiators are filling a tad only and bleeding does not complete. Please advise. Thanks
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
British gas boiler 330 f22 fault
- Thread starter notaplumber1
- Start date
Top your pressure up.
Hi Dan. I do not have a combi boiler. I have a open vented system. How do increase pressure?
F&e tank is full. I have opened inlet valve. When i turn on system i cannot hear anything from the pump.
Probably the pump then.
You might have pulled some gunge down into the system from the f&e when you drained down... Force water using a hose on a drain point back up the system or try a wet vac.
Tnx
Dan tnx for reply. Lucky it was not cold feed. Pump was replaced. Everything back to normal and my towel radiator had no leaks either. Tnx again
What are the photos above for in relation to this thread? The offset bends to the towel warmer (IMO) would have looked better using 135's and the black plastic buffers can now be removed as you have piped up to the warmer.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
