Burner extinguishes after 10 seconds

Joined
8 Dec 2010
Messages
17
Reaction score
0
Location
Tyne and Wear
Country
United Kingdom
Hi Folks,

I have the following problem with Baxi 105e combi (standard)

Fault 1.Burner extinguishes after 10 seconds with the burner neon light flashing off on CH demand then restarts after 30 seconds same sequence is repeated.

Fault 2. DHW doesn't reach max temperature at all flow rates
Info: Heat exchanger very both sides.

Fault 3. Hot water passing through CH side when taps are on, clean or replace back unit of diverter valve or heat exchanger.

I have been advised to check the min and max burner pressure.

Any advice would be grateful thanks.
 
Sponsored Links
hey all, I live in newcastle am really finding it hard getting a job as i am newly qualified gas engineer, don't no why?....is it because of my experience or anything else. I have sent alot of CV,s to companies and agencies but no success. Hopefully something will turn up,

any advice would be grateful...thanx

You were newly qualified in 2011 !

Surely since you have realised that we do not give gas advice on the open forum?

If you want such advice you need to post in the Combustion Chamber part of this site!

Tony
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top