I am really struggling to remove a substance from the bricks on an outside wall. I have tried regular brick cleaner and it hasn’t touched it. Now left chiselling for ours at it. Any help really appreciated
It looks to me like the water has washed the lime away between the bricks, and where the lime-rich water has evaporated off the surface of the saturated bricks, it has left a hard deposit of limescale. There might be other minerals fom the groundwater. I don't think its lichen.
You really need to clean out the remaining dust between the bricks and pack them with a stiff mortar mix. It is OK to use cement, which will not be damaged by the wet.
Start at the bottom.
If the wall ever gets dry, you can have a go at getting loose lime off with a stiff brush. Don't use a wire brush, which will damage the bricks. The bricks themselves look quite good, although they are as loose as an old smoker's teeth.
You can drill some weep holes, but don't do anything vigorous until you have packed with new mortar, or the loose bricks may fall out.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local