Can anyone help me with F22 code, Vaillant ecoTEC pro 28

Joined
6 Feb 2017
Messages
5
Reaction score
0
Country
United Kingdom
Hello everyone!

I know this has been covered all over the internet, but i have been trying to figure this out for hours now with no luck.

Found the code F22 today, we seem to be missing the manual. None of the videos or pics online match our boiler pipes so i'm stumped.

We have a filling loop. but it's not attached to anything, just clipped onto the wall so i have no idea where these go.

I will attach photos of the Filling Loop and everything else. We have a very cold house so any help is much appreciated! Thankyou
 

Attachments

  • 16427364_10211714084065118_4360915636140432333_n.jpg
    16427364_10211714084065118_4360915636140432333_n.jpg
    82 KB · Views: 1,017
  • 16640827_10211714083865113_7119160672343899758_n.jpg
    16640827_10211714083865113_7119160672343899758_n.jpg
    38.5 KB · Views: 946
  • 16640869_10211714083825112_4126465165334799930_n.jpg
    16640869_10211714083825112_4126465165334799930_n.jpg
    83.2 KB · Views: 1,140
  • 16507809_10211714083585106_7266170727522203316_n.jpg
    16507809_10211714083585106_7266170727522203316_n.jpg
    77.1 KB · Views: 1,142
Sponsored Links
Pic 3; remove the caps off the two silver valves
Pic1; attach hose between the valves u took the caps off (tightish)

Then turn 1 black lever on fully, then turn the other black lever slowly and watch the pressure rise to 1-1.5bar on the display or the boiler fires
 
Thankyou so much! That worked, your a life saver! Am i safe to remove the filling loop or should i just leave it on?
 
What he said ^ :D

That's actually been done properly... filling loop flexi removed AND clipped to the wall where you can see it... what a thorough person it was who installed that!

Mostly they're are left connected, which is what would have been better for you in this instance :sneaky:
 
Sponsored Links
Now... if your system loses pressure again in the next couple of days, you have other issues that will need addressing!

Be warned :(
 
What he said ^ :D

That's actually been done properly... filling loop flexi removed AND clipped to the wall where you can see it... what a thorough person it was who installed that!

Mostly they're are left connected, which is what would have been better for you in this instance :sneaky:

I'm glad it was clipped to the wall! Seen lots of stories today of people not being able to find it! I shall leave it attached to the pipes now. So quick and easy! Glad i got help before calling out for help tomorrow!
 
Now... if your system loses pressure again in the next couple of days, you have other issues that will need addressing!

Be warned :(

Is that something that happens alot then?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top