G/F and kids think you're great
then they should buy me a pint
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Central Heating Blowing Fuses
- Thread starter Davey
- Start date
then they should buy me a pint
Back again 
Bled the radiators and the pump and when running on C/H only the system is working fine.
However when the H/W is on the pump runs for a few mins and then starts making a noise. We switch the pump off and bleed it and all is well for a few mins until it starts again.
There seems to be air trapped in the H/W circuit. Is this normal? How long is it likely to be until all the air is out?
Is there any way of bleeding the H/W part of the system? I'm worried this is going to damage the pump.
Davey
Bled the radiators and the pump and when running on C/H only the system is working fine.
However when the H/W is on the pump runs for a few mins and then starts making a noise. We switch the pump off and bleed it and all is well for a few mins until it starts again.
There seems to be air trapped in the H/W circuit. Is this normal? How long is it likely to be until all the air is out?
Is there any way of bleeding the H/W part of the system? I'm worried this is going to damage the pump.
Davey
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
