THe objective is to reduce gas/electric consumption. We usually use a therostat timer that turns on based on temp and constantly fiddling with it is a pain.
Turning on the boiler for 10 minutes and then off leaves the house toasty for about 40-50 minutes and that way we reduce gas and electric consumption whilst maintaining good room temps.
The boiler is a worcester 24i junior combi, about 10 years old and in very good condition.As suggested, you could reduce the boiler temperature . And, maybe, reduce it to something which might sound a bit crazy, like 35 degrees. That would cost you roughly the same per hour, but you could have the heating on for long periods, and you would feel a lot more comfortable. But you need the right sort of boiler to make it work. Both from a cost perspective, but also from a safety perspective. Can you advise what boiler you have? Ideally, make and model, but at least advise is it a combi, and roughly how old is it?
I've been doing a lot of calculations around this recently, because I have a similar but less extreme problem. With the right boiler, you could actually save money, whilst feeling much more comfortable.
The boiler is a worcester 24i junior combi, about 10 years old and in very good condition.
I have spent quite a lot of time insulating the house and filling gaps, windows etc such that heat retention is very good. It's not that it'll be less comfortable, it's more so the case that I don't need the boiler to run continiously, and have found that running the boiler for 10-15min every 1-2 hours keeps the house at a very comfortable temperature.
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local