change of room stat

[neil2407]

can any of you kind persons let me know how to wire a danfoss rmt 230
i have a drayton at the moment and the wiring is the problem the drayton is wired as followed terminal 2 not connected terminal 1 is black wire. terminal N is blue and terminal 3 is brown no earth needed the terminals on the danfloss are term 4 / 1 /3/ 2 just need to know which wires go where from drayton to danfoss thank you

 

[D_Hailsham]

Blue to Terminal 4
Brown to Terminal 1
Black to Terminal 2

Terminal 1 should be live when the time switch is on and terminal 2 should only go live when the thermostat clicks on. If necessary reverse brown and black; i.e. black to 1 and brown to 2.


The wiring diagram is Here