cold rads on top floor

[tonyth]

still hot both sides. got water dripping down from the T + P Valve almost in a display type area??? never seen that before. How do i know what pump speed is at?

 

[tonyth]

its on seeting 2 2000rpm goldstar 50

 

[tonyth]

the pressure gauge below zilmet is below 1 bar and has dopped

 

[picasso]

jobs getting bigger what kind of unvented you got ? if the t + p is running then the hot water valve will be open, turn off the hot water and see if the top rads heat up, it will take a little while for the pipe on the bypass valve to cool down.

 

[tonyth]

its a ariston wrc nsf, god i hate plumbing!!

 

[tonyth]

thanks for all the advice last night, eventually called a heating engineer this morning and it was a airlock and sludge in the system. all nice and warm now
thanks again

 

[Wangerman]

thanks for all the advice last night, eventually called a heating engineer this morning and it was a airlock and sludge in the system. all nice and warm now
thanks again

Glad you got it sorted

 

[tonyth]

yeah thanks for your help to mate, much appreciated and keep up good work on here

 

[Wangerman]

yeah thanks for your help to mate, much appreciated and keep up good work on here

You too hope you stick around plenty of forums to get stuck in to.

I mostly hand around the plumbing forum for some reason, guess after doing electrics all day I don't want to read about it at night

 

[tonyth]

you must be mad!!! Love electrics trained as a sparky twenty odd years ago then got out of it and into a sort of engineering!! If you call fast race cars engineering lol

 

[Wangerman]

you must be mad!!! Love electrics trained as a sparky twenty odd years ago then got out of it and into a sort of engineering!! If you call fast race cars engineering lol

Fast race cars !!!!!!!

Tell me more

Car's are my hobby love working on em

 

[tonyth]

F1 mate been in it six years down in enstone

 

[Wangerman]

You work for Renault then ?

What in CFD ?

 

[tonyth]

yes renault, not cfd im in the inspection dept hardly glamourous!

 

[Wangerman]

yes renault, not cfd im in the inspection dept hardly glamourous!

Hey you work in F1 !!!!!!!!!

Even if you swept the floor there you still work in F1 !!!!

Mate of mine used to work for Arrows years ago as an IT tech, went to all the gp's for 5 years or so but gave it up as he was away for 9 months
of the year and wanted to start a family