Cold Water Feed/Pipe layout - Thermo Mixer or Elec shower?

Joined
13 Jun 2005
Messages
17
Reaction score
0
Location
Cumberland
Country
United Kingdom
Which will work better a Thermostatic Mixer or an electric shower considering my cold water feed and existing pipe layout, I dont want to change any pipework and would prefer a thermo mixer......

Cold feed to house...............then....

Branches off to downstairs Sink and to downstairs utility room / Washing machine.
Then upstairs to Toilet, then Basin, then Bath then finally to upstairs Combi Boiler.

Hot feed then runs from Combi to Bath, to basin, to Downstairs sink then finally ends at utility room / washing machine.

Have removed existing electric shower and have a cold and hot pipe already fitted to use for either mixer or electric shower which feeds out between the Bath and basin pipework.

Can anyone help? and any advice on selecting a good thermo mixer for about £150.......
 
Sponsored Links
Thermo mixers are great until your combi breaks down then you could end up being a bit on the smelly side for a while especially if its over christmas when it happens.

As for selecting a mixer shower just make sure that it is suitable for a combi and that your combi is indeed suitable for the shower
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top