Combi boiler CH switch setting

Joined
17 Apr 2007
Messages
2,761
Reaction score
147
Country
United Kingdom
If you have a wireless programmable timer that works with a receiver unit wired in to the boiler, should the boiler's CH switch be set to Off, On or Auto for the wireless timer to be in full control?

The boiler has an onboard push pin dial type timer.

thanks
 
Capture.JPG
 
Could I just clarify - do the pins in the timer dial need to be all in the 'on' position? I recently had a CP4 remote controller and receiver fitted and the grasslin push pin dial was left with all the pins in the 'on' position and the dial switch at '1', or 'on'. What actually happens is that the heating seems to be running continuously day and night, taking no notice of the remote controller, which does appear to be talking successfully to the receiver fitted to the combi boiler judging by the green light that appears on it when the remote thermostat is asking for heat to be supplied. And the red light when no heat is being requested.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top