Hi, looking some help or ideas for the concrete base I am planing to lay.
The base is for a steel shed/workshop measuring 6m x 4m. The problem is that the site I intend to build it on is at a slope. It slopes by approx 2ft from front to back.
I am thinking I will need to build a retaining wall at the back and partly up the sides to fill in the ground and then 100mm hard core followed by 150mm of 30n concrete.
Can any one tell me if this is ok or is there any better ways to do it
Thanks
The base is for a steel shed/workshop measuring 6m x 4m. The problem is that the site I intend to build it on is at a slope. It slopes by approx 2ft from front to back.
I am thinking I will need to build a retaining wall at the back and partly up the sides to fill in the ground and then 100mm hard core followed by 150mm of 30n concrete.
Can any one tell me if this is ok or is there any better ways to do it
Thanks