Connecting aco drain to old clay pipe

[markyyyyyy]

I am installing an aco drain to an old clay pipe

It’s quite an awkward angle, is there a flexible 110mm pipe that I can use for such a job to connect the aco to this clay pipe (I’m putting a rubber adaptor on to allow me to connect 110mm pipe to it)

Cheers

 

[blup]

I am installing an aco drain to an old clay pipe

It’s quite an awkward angle, is there a flexible 110mm pipe that I can use for such a job to connect the aco to this clay pipe (I’m putting a rubber adaptor on to allow me to connect 110mm pipe to it)

Cheers

There are flexible adapters which might mean you have to cut away and replace a length of the existing clay to get tne required wriggle room at the aco connection.

 

[Hugh Jaleak]

Could bodge with a bit of 4" coil, type used for Land Drains/Service ducting if you can find any, alternatively, cut the clay back enough to allow use of an adjustable bend to get the angle you require.

 

[blup]

Screwfix do them, pushfit flopast double socket adjustable bend 110mm