connecting toilet to 4inch pipe

[dextur]

Hey I need to connect a toilet to a 4inch waste pipe that comes up through the floor close up to the wall in the room what kind of pan connector/s would people recommend I may need? View media item 72434

 

[dextur]

A bent pan connector doesn't bring it forth enough in to the room to fit the toilet back to the wall.

 

[Blagard]

Would this reach?
http://www.mcalpineplumbing.com/wc-...length-extended-inlet-rigid-wc-connector.html

Check the technical drawing in there for dimensions

 

[gigz]

What about this one ? View media item 72436

 

[dextur]

Thanks I need the connector to come further in to the room it's about 4inch short of the toilet waste outlet at the moment.

 

[Blagard]

Then you should be able to use one of these

http://www.mcalpineplumbing.com/4-110mm-flexible-wc-connector-medium-length.html

The alternative is you post accurate dimensions so a rigid pipe solution can be checked.

 

[dextur]

Thanks are they ok to come up from floor level and bend round on to the toilet?

 

[Blagard]

Thanks are they ok to come up from floor level and bend round on to the toilet?

Yes, but be aware of the different lengths on the market. The one I linked to would be my choice based on the information you posted

 

[JohnD]

there are still a few S-trap WC pans on the market, I keep an eye out but it is difficult to find one that will set back nearthe wall.

I expect yours is a low-level, so you can trim the pipe from the system to make some adjustments. I don't think I've seen a close-coupled S-trap.

example: http://www.ebay.co.uk/itm/261367436981?ssPageName=STRK:MEWAX:IT