B
Brightonguy
Hi, I am to renovate a house and I am at the "design" stage. No builders have been contacted yet, until I lay down what I want.
The kitchen will have a cupboard with a full length door off it. It will contain the combi and electric consumer unit which will be at a convenient face level height and easy to see and use. I prefer a Wylex as they have a plastic cover you can see through. The kitchen is to have a fridge, integrated m/wave, oven. I intend to have separate mcb's for these appliances at the CU. These mcb's will also be isolators, precluding having ugly isolators next to the appliances. The appliance will be in large units and it will be difficult to get any in a decent location anyhow. The idea is to have nice and clean kitchen lines with only sockets on show. To isolate each appliance, all is needed is to flip the mcb in an adjacent cupboard which will be clearly labelled. I wondered if this it to full regs.
ta.
The kitchen will have a cupboard with a full length door off it. It will contain the combi and electric consumer unit which will be at a convenient face level height and easy to see and use. I prefer a Wylex as they have a plastic cover you can see through. The kitchen is to have a fridge, integrated m/wave, oven. I intend to have separate mcb's for these appliances at the CU. These mcb's will also be isolators, precluding having ugly isolators next to the appliances. The appliance will be in large units and it will be difficult to get any in a decent location anyhow. The idea is to have nice and clean kitchen lines with only sockets on show. To isolate each appliance, all is needed is to flip the mcb in an adjacent cupboard which will be clearly labelled. I wondered if this it to full regs.
ta.