Dark patch on new plaster

Joined
18 May 2026
Messages
10
Reaction score
0
Country
United Kingdom
Hello

We had a wall plastered a few weeks ago which has dried but some dark patches appear when the room is warm. They don't feel wet or powdery. The section in question was taken back to brick then plastered.

Anyone seen anything like this before or have any idea what it could be?

Thanks
 

Attachments

  • IMG-20261118-WA0000.jpg
    IMG-20261118-WA0000.jpg
    205.1 KB · Views: 13
Patches that darken when the room warms up and don't feel wet are often hygroscopic salts in the brickwork. When the wall was taken back to brick, whatever salts were in there (old damp, or a chimney breast with soot deposits) can come through into the new plaster. They pull moisture out of the air, so they show up when the air is warmer and more humid, e.g. after cooking, showers or drying washing. Is this section a chimney breast or an external wall?
A few weeks can also simply not be enough. Plaster over brick can take well over a month to dry fully, longer in winter, so some patchiness can be normal.
A cheap test: tape a square of cling film or foil tightly over a patch for 24 to 48 hours. Moisture underneath means it's coming from the wall. Moisture on the room side means condensation on a cold spot.
I'd hold off painting until you know. If it turns out to be salts, normal emulsion won't hide it for long, and the fix is usually re-plastering that bit with a salt-resistant render/plaster system.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top