DIPLOMAT ADP8322 Dishwasher Stuttering!!!

[vwroyd]

Hi,
I have what seems to be stuttering coming from the the pump when i run any cycle above 40 Degrees. It's fine on the pre-rinse and rapid cycles and when draining is also fine. Any help would be gratefully recieved.
Regards Chris

 

[vwroyd]

BUMP!!!

 

[markmongan]

Hi,
This sounds exactly like the problem I am having with my adp8322. Anybody have any ideas?

thanks
mark

 

[zipper]

Sounds like you may have a failing circulation motor or a piece of glass rattling around in the impellor housing. Is the service number 8545 000 15819? (model details usually laser engraved on the door lip).

 

[markmongan]

Hi,
Thanks for that info. The service number is 8545 000 15810.
Is it easy to get to the impellor housing?

 

[markmongan]

Ok,
I've opened up the wash motor impeller and there is nothing jammed inside. That is assuming that the wash motor is the Askoll item mentioned in this post

http://www.diynot.com/forums/viewto...&start=0&sid=bb594cc3ce5cf2ccbafd2b5cf1d1d96a

Im reading 31 ohms across the terminal which is what the other chap got so I'm guessing that its not the motor?

any ideas?

mark[/url]

 

[zipper]

If you have an Askoll type circ. pump be aware they have a pretty poor reputation. The resistance you measured doesn't tell you anything other than the winding isn't O/C. Try hotwiring it to see how it runs dry, then empty a litre or two of water in the machine & run it loaded.

 

[markmongan]

thanks

i'll try that tomorrow