diplomat ADP8322

[john72]

Hello All

i have a intergrated diplomat ADP8322 dishwasher, has worked fine without issue untill yesterday, now when on any cycle the jets do not seem to spin, no water seems to reach the top two jets and the water coming out of the bottom jets is very limp, heat does not seem to be the problem, or drainage so any ideas folks?

regards

john.

 

[zipper]

Check the spray arms aren't blocked.

 

[rocks1]

Circulation pump gone. Very expensive part.

 

[john72]

Check the spray arms aren't blocked.

hello Zipper

thanks for the quick response a slight drizzle of water seems to come out of the bottom spray arm, would this also cause it not to spin?

regards

john.

 

[zipper]

If the spray arms are chock a block with debris they don't rotate/spray too well. If the arms are clear then its the circulation motor as Rocks mentioned.

 

[captaincaveman1]

Could also be a weak motor capacitor but if it the circ pump is at fault as rocks suggests then put your money on a new aplliance given the make it is its really not worth spending much on