Disgrace
- Thread starter ebee
- Start date
Because the Electrician took great care in first fix by drilling holes in 5" x 2" joists on the nuetral axis in the zone 0.25 to 0.40 of span from end and three dias apart only for some butchers to come along and notch on top .
The Electrician was a bit miffed.
The lady who owns the house is a bit upset
EEGA, the local MP, a Housing Association and LABC are involved
The Electrician was a bit miffed.
The lady who owns the house is a bit upset
EEGA, the local MP, a Housing Association and LABC are involved
5 or 6 blokes fitted ch in one day on one of those grant thingies by Warm Front.
the morning after their visit the joists were viwed thus .
most joists at the front and most at the rear elevation. Only a few joists unaffected.
Seen one today where a similar job was done on a grant (The actual contractors used not known yet so it may be the same one`s or not).
Earth Bond clamps a disgrace, slack clamp, locknut slack, termination poor and not very secure.
Mind you I`ve seen others with no bonding at all or very substandard.
I`ve put the pic in the WIKI Hall of shame
Makes yer blood boil.
the morning after their visit the joists were viwed thus .
most joists at the front and most at the rear elevation. Only a few joists unaffected.
Seen one today where a similar job was done on a grant (The actual contractors used not known yet so it may be the same one`s or not).
Earth Bond clamps a disgrace, slack clamp, locknut slack, termination poor and not very secure.
Mind you I`ve seen others with no bonding at all or very substandard.
I`ve put the pic in the WIKI Hall of shame
Makes yer blood boil.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
