Dishwasher still tripping after leak repair

[securespark]

If you get a (the) spark back, suggest fitting a temporary socket on the non RCD side to see if the DW trips a plug-in RCD.

He could piggy-back off the CH MCB.

 

[MrBrindle]

Hi all, just a quick update. Managed to get an appointment on the weekend for this morning.

Bosch guy just came. He did some further testing and found that something was going up and down while the machine ran - suggesting a leakage or something, although he's not an electricians so csan't be 100%. I'm not sure if he meant earth leakage. But it will be on e-mail when I get the statement later.

He changed the pump and some sort of heat part (they're both in one), and said it was testing fine after wards.

So fingers crossed that was it.

 

[BlueLoo]

Yay, great news and thanks for the update

 

[MrBrindle]

This is what's come through on the e-mail statement:

'Found insulation test slightly slow to gain required reading. Suspect heat pump. Exchange the heat pump and yeast all ok before leaving Heater on at 10.00 Amps and running at 9.7 amps'