- Joined
- 8 Dec 2007
- Messages
- 1
- Reaction score
- 0
- Country
Hi,
my dishwasher has stopped operating normally recently, I hope there is an expert in this forum that would kindly help me troubleshoot it and fix it.
Many thanks in advance,
Rgds.
Details:
Product ID: AEG OKO FAVORIT 5081 PNC 911-232-29800 S/N 844-62039
Symptom: operation of dishwasher is interrupted before the end of the selected programmed cycle
Interim Corrective Action: manually restart cycle to resume programme
Here is a log of a dysfunctional cycle:
-Dishwasher is turned ON
-Programme is selected by pressing the programme pushbutton, in this case I have used the 30 min washing programme
-Timer display flashes 7 times
-30': operation starts
-15': operation is interrupted without any external intervention, programme pushbutton's led flashes continually, to resume operation the programme pushbutton has to be pressed
-14': operation is interrupted again as describe above, same action required
-11': operation is interrupted again as describe above, same action required
-10': operation is interrupted again as describe above, same action required
-0': cycle is over (note that the last minute of operation seems to be lasting over one minute).
my dishwasher has stopped operating normally recently, I hope there is an expert in this forum that would kindly help me troubleshoot it and fix it.
Many thanks in advance,
Rgds.
Details:
Product ID: AEG OKO FAVORIT 5081 PNC 911-232-29800 S/N 844-62039
Symptom: operation of dishwasher is interrupted before the end of the selected programmed cycle
Interim Corrective Action: manually restart cycle to resume programme
Here is a log of a dysfunctional cycle:
-Dishwasher is turned ON
-Programme is selected by pressing the programme pushbutton, in this case I have used the 30 min washing programme
-Timer display flashes 7 times
-30': operation starts
-15': operation is interrupted without any external intervention, programme pushbutton's led flashes continually, to resume operation the programme pushbutton has to be pressed
-14': operation is interrupted again as describe above, same action required
-11': operation is interrupted again as describe above, same action required
-10': operation is interrupted again as describe above, same action required
-0': cycle is over (note that the last minute of operation seems to be lasting over one minute).
