Hi Everyone,
I'm going to replumb my bungalow myself as at the minute its an old system with cylinder and multiple tanks in the roof. It'll all be fed of a firebird 26kw oil combi boiler.
The property is suspended wooden floors and I can get into the crawlspace so all all piping will be run under the floor.
does my diagram below look ok?
I'm going to be using 15mm to bring in the mains and then teeing off in the garage to supply cold taps etc. and boiler.
The central heating pipework will all be 22mm and then 15mm of the main flow and return pipes to each radiator.
do I need to install drain valves or anything else anywhere or is my basic map pretty much ok?
does anyone have any hints or tips to make it easier or work better?
All advice is much appreciated.
Alternatively if anyone on here is located close to Exeter in Devon and in the trade please feel free to contact me as I might find I don't have the time to do it and I need to employ someone to do it for me!
I'm going to replumb my bungalow myself as at the minute its an old system with cylinder and multiple tanks in the roof. It'll all be fed of a firebird 26kw oil combi boiler.
The property is suspended wooden floors and I can get into the crawlspace so all all piping will be run under the floor.
does my diagram below look ok?
I'm going to be using 15mm to bring in the mains and then teeing off in the garage to supply cold taps etc. and boiler.
The central heating pipework will all be 22mm and then 15mm of the main flow and return pipes to each radiator.
do I need to install drain valves or anything else anywhere or is my basic map pretty much ok?
does anyone have any hints or tips to make it easier or work better?
All advice is much appreciated.
Alternatively if anyone on here is located close to Exeter in Devon and in the trade please feel free to contact me as I might find I don't have the time to do it and I need to employ someone to do it for me!