Doing away with a manhole

[ashdene]

Thanks guys, Im going to put a rodding point on the 90 degree turn but I cannot find anything that only has 2 sockets with a 90 degree turn and an inspection point, all I can find is huge manholes with loads of inlets?

Any links please?

 

[kvsalamander]

http://www.marleyplumbinganddrainage.com/literature/#hdpe

 

[Hugh Jaleak]

Either a junction and use spare inlet for rodding eye, but that'll only give you access in one direction, or if invert is less than 600mm then the 300mm chambers would be better IMO.

http://www.screwfix.com/p/mini-access-chamber-300mm-base/18837 and use 30 & 15 deg bends on inlet/outlet to achieve 90deg turn.

 

[ashdene]

Thanks very much guys, I can see what im dealing with now, God only knows how im going to create access in a block and beam floor for one of those things though, Im over 600mm deep so im going to have to go for a 450mm one