- Joined
- 14 Nov 2014
- Messages
- 1,748
- Reaction score
- 469
- Country
Just wondered if anyone had ever changed the perspex dome on a flat roof rooflight for glass, if so how did they do it. Open to any sensible suggestions
Domed perspex Rooflight
- Thread starter ronniecabers
- Start date
How would you do it? The domed perspex is screw fixed through holes around the perimeter.
I suppose you could have a frame fabricated out of angle and fixed to the frame, then the glass dropped (sealed) into the frame. Safety issues asside .....
I suppose you could have a frame fabricated out of angle and fixed to the frame, then the glass dropped (sealed) into the frame. Safety issues asside .....
- Joined
- 14 Nov 2014
- Messages
- 1,748
- Reaction score
- 469
- Country
Not sure what the safety issue would be? Would use Toughened or even laminate glass anyway.
Ideally need to do away with the perspex ..might have to be a new rooflight I suppose
Ideally need to do away with the perspex ..might have to be a new rooflight I suppose
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
