- Joined
- 29 Mar 2005
- Messages
- 178
- Reaction score
- 0
- Country
Is it possible get products like this, but with an insert that allows for two 2.5mm T+E cables?
https://www.medlocks.co.uk/wiska-sprint-consumer-unit-gland-25mm-for-twin-and-earth-6mm
We have 16 circuits. I want to install a Wylex NMX 16 way main switch CU (I already have all of the mini-RCBOs) but the cable entry needs to be at the top of the CU because of where the access is, and if I'm going to use one gland per cable there won't be enough space to accommodate all of the cables.
We have the following outlets:
- five ring mains on B32s with 2.5 T+E
- three B16s feeding a single 2.5 T+E
- seven B6 1.5 T+E outlets
- one 6mm 3 core armoured cable
I was thinking of getting a "plain sides" CU so that I could drill my own entry holes and perhaps space them closer than the knockouts in a box that comes with knockouts, or staggered, so that I could maybe fit more glands than would be possible with a box with knockouts and using those knockouts.
https://www.medlocks.co.uk/wiska-sprint-consumer-unit-gland-25mm-for-twin-and-earth-6mm
We have 16 circuits. I want to install a Wylex NMX 16 way main switch CU (I already have all of the mini-RCBOs) but the cable entry needs to be at the top of the CU because of where the access is, and if I'm going to use one gland per cable there won't be enough space to accommodate all of the cables.
We have the following outlets:
- five ring mains on B32s with 2.5 T+E
- three B16s feeding a single 2.5 T+E
- seven B6 1.5 T+E outlets
- one 6mm 3 core armoured cable
I was thinking of getting a "plain sides" CU so that I could drill my own entry holes and perhaps space them closer than the knockouts in a box that comes with knockouts, or staggered, so that I could maybe fit more glands than would be possible with a box with knockouts and using those knockouts.