Hi, I am looking to install a new Electrolux double oven (5.4kW) and a separate Eletrolux gas hob (3A fuse fitted, specifies 0.75mm min cable size). At present I have a cooker control unit with 6mm2 cable an a 32A mcb on it\\\'s own circuit from the consumer unit. As I am not sure that I can run both off one control unit within 2m of each appliance, can I have two control units on the same radial circuit (using 6mm2 cable again) - i.e. one to run the double oven and one for the hob? At present both our existing single oven and gas hob run off the same control unit as they are located together.
If I run a flex outlet from each control unit, presumably this should also be in 6mm2 cable?
Any help gratefully received.
If I run a flex outlet from each control unit, presumably this should also be in 6mm2 cable?
Any help gratefully received.