Downstairs Shower Room Questions

Joined
16 May 2006
Messages
83
Reaction score
1
Location
Pembrokeshire
Country
United Kingdom
These questions mostly relate to a limited available length of stack to branch into:
1. Can I join the waste from the shower & handbasin into one, before the stack?
2. What distance does the above inlet (on the stack) need to be from the WC inlet?
3) ....or are the above inlets preset on the branch connection? As they are both coming from the same side, is there a branch with the 2 connector inlets (phraseology good eh?!! :oops:) one above the other?
THANKS FOR ANY SUGGESTIONS!
 
Sponsored Links
Google Marley plumbing....they`ve got a good soil/waste diagram ;) :idea:
 
1. Yes, but use 50mm pipe from the point where they join, to the stack.
2. Bring the waste from 1. into the the top of the stack pipe (assuming its horizontal at that point).
3. As Nige F said.
 
Sponsored Links
Thanks very much for this guys - a great help!
Relating to (2) on Bathjobby's reply, I'm breaking into an existing vertical stack.....can I therefore get a seperate boss for the toilet waste, and one for the basin/shower, position them one on top of the other and rotate so both outlets are facing the same way (cos both are coming towards the stack from the same direction), or will that nasty Buildng Inspector chappy :evil: find fault?
Hope this isn't toooo confusing, THANKS AGAIN! :cool:
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top