Wish to change a radiator, and have to drain the system, unfortunately no radiator has a drain outlet, is the only solution to pick a ground floor rad and open the valve or is there another less messy solution. Thanks
Is the new rad. a differant size?
Do you need to change the pipe work?
If the pipe work does not need changing Shut both rad valves loosenone end of the rad. and just drain the rad. If you have to drain the system attach a hose pipe fitting onto the rad valve and drain through a hose pipe.
Make sure you have shut down boiler ETC.
JonB
you can get self-cutting washing machine tap clamp onto pipe,screw it in and use w/m hose to drain down into bucket ,tap can turn on and off so u can empty bucket if hose cannot reach outside[/list]
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local